Linksys Cable/DSL Router

PPPoE

The Linksys router can be used instead of the PPPoE Enternet 300 software. See the screen shot below and enter the following settings:
WAN IP Address: Obtain IP Automatically
Login: select PPPoE
User Name: GMA user name
Password: GMa password
Set "Keep Alive"

Click the Apply button at the bottom of the screen to apply these settings.

Your web browser can the be closed. By re-opening the browser you should be able to access web pages. If not, your computer may need to be re-booted in order to be assigned a LAN IP address by the router. After re-booting if web pages are still not available verify the router settings and the Network Control Panel settings in your computer.

Back | Finish
SETUP
This screen contains all of the router's basic setup functions. Most users will be able to use the router's default settings without making any changes. If you require help during configuration, please see the user guide.
Host Name:       (Required by some ISPs)
Domain Name:       (Required by some ISPs)
      Firmware Version:      1.38, Feb 20 2001
LAN IP Address:      (MAC Address: 00-04-5A-2F-5B-71)
      . . . (Device IP Address)
      (Subnet Mask)
WAN IP Address:      (MAC Address: 00-04-5A-2F-5B-72)
       Obtain an IP Address Automatically
 
    Specify an IP Address . . .
    Subnet Mask:
. . .
    Default Gateway Address:
. . .
DNS(Required)                  1: . . .
2: . . .
3: . . .
Login:  
 
 		     PPPoE RAS Disable
      NOTE: PPPoE is for ADSL user only.
                RAS is for SingTel ADSL user only.
       User Name:  
       Password:    
       RAS Plan:    
      Connect on Demand: Max Idle Time Min.
    Keep Alive
 

   

Back | Finish

Tutorials Home Page