Static IP on a Single Computer with no Router:
* PPPoE EnterNet 300 software is not used.
* IP address is assigned to the local computer.
* The computer is on-line when ever it is turned on and connected to the DSL modem. This increases your vulnerability from "hackers". Please consider using personal firewall software if you have a Static IP address and are not using a router.

For static IP addresses, the PPPoE Enternet 300 software is no longer used. It can be uninstalled from Control Panel, Add/Remove Programs. To set up one computer for a static IP address, go to Control Panel, Network and double click the TCP/IP for the Network card. Verify the following settings:
IP address: the IP GMA has assigned to the customer
Subnet mask: 255.255.255.0
Gateway: assigned IP with .1 in the last set of numbers. Example: 65.19.75.1
DNS Configuration: Enable DNS.
Host Name is the username, Search Domain is gmavt.net
DNS Nos.: 65.19.68.30 and 69.54.24.30

Detailed Windows 2000 Instructions

(click here for OS 10)
Connect Via: Ethernet (if this is not an option click here)
Configure: Manually
IP address: as assigned by GMA
Subnet mask: 255.255.255.0
Gateway: assigned IP with .1 in the last set of numberst. Example: 65.19.75.1
DNS Nos.: 65.19.68.30 and 69.54.24.30
Search Domain: gmavt.net

Static IP using a Router:
* PPPoE EnterNet 300 software is not used.
* IP address from GMA is assigned to the router as the WAN IP.
* Local IP's will be assigned by the router using DHCP. See Lynksis Admin Screen
* Local Computer(s) Should have the following network settings.